The functional mast slider

With the help of the FLIN mast sliders, the FLINsail can be used quickly and flexibly at any time. The specially developed mast sliders simply click into the mast groove above the mainsail or onto the T-rail, and the FLINsail can be hoisted over the mainsail halyard like a sail.

Inserting the FLIN mast slide

The FLIN mast sliders can be easily clicked into the mast groove: This allows the FLINsail to be set up without unthreading the mainsail from the mast groove. The mast sliders can be inserted into the mast groove above the mainsail.

 

 

The mast slide is provided with a loop for insertion into the groove. If the loop is pulled, the mast slider tapers.

While the loop is held under tension, the mast slider can be easily inserted into the mast groove.

If the loop is left loose again, the mast slider forms a thickening by spring force and finds a hold in the mast groove.

Mast sliders for all systems

We offer our functional FLIN mast sliders for all common mast grooves and T-rails. The mast sliders for the T-rails can be easily placed above the mainsail on the T-rail, just as with the mast groove.

 

 

Width groove

Our FLIN mast sliders are compatible with all common mast grooves. No matter whether your mast profile is from Selden or another manufacturer, the FLIN mast sliders can be inserted into any mast groove. Only the groove width is decisive for the choice of the suitable mast slider.

Narrow groove

Even if your mast has a narrow groove in which the mainsail is directly guided, we offer the matching mast slider. Simply measure the width of the groove to select the right mast slider.

T-rails

We also supply mast sliders that can be mounted on a T-shear. We support all common systems from Harken, Ronstan and Facnor. Tell us the width of your T-line and we will fit your FLINsail with the appropriate system.

Measure mast system

Which mast system do you use?

The FLIN mast sliders can be inserted into the mast groove above the mainsail or placed on the T-rail. This means that the mainsail does not have to be unthreaded in order to place the FLINsail above the furled mainsail.

Select the appropriate FLIN mast slider for your mast system in the order form. To do this, measure the width of your mast groove or T-rail as shown on the right.

Mast groove

 

Measure the width X of the mast groove as shown in the drawing.

T-rail

 

Measure the width X of the T-rail as shown in the drawing.